The MAX9910 datasheet specifies that this amplifier is unity-gain stable for loads up to 30pF. However, the capacitive load can be increased to 250pF when the amplifier is configured for a minimum gain of 10V/V. Applications that require greater capacitive-drive capability should use an isolation resistor between the output and the capacitive load. Also, in unity-gain applications with relatively small RL (approximately 5kΩ), the capacitive load can be increased up to 200pF.
Arduino Based Auto Transport Device
AUTO TRANSPORT DEVICE is idea of making a self-driving device that is low cost and can carry high load to its destination. This device is ...
-
“Color coding” is used in electronics to identify between different components. In the case of resistors, color coding is used to ident...
-
I did it! I've always wanted to build my own amplifier, and now, finally, I made one....
-
This circuit is copied from:- http://www.electroschematics.com/12414/night-security-light-with-hacked-pir-sensor/ Security lighting ...
No comments:
Post a Comment